Related Manuals for SINTERIT SANDBLASTER SLS
Summary of Contents for SINTERIT SANDBLASTER SLS
- Page 1 Sinterit SANDBLASTER SLS ORIGINAL MANUAL Please read the instruction manual before using the device. Version 7/2021...
-
Page 2: Table Of Contents
11. Trademarks ................................18 12. Terms of warranty ...............................19 13. Technical support ...............................19 The SANDBLASTER SLS is designed for cleaning, polishing and finishing of printouts, using dry abrasive material only. IMPORTANT! Sandblaster does not include an air compressor. 2 | Sinterit SANDBLASTER SLS User Manual... -
Page 3: Marking Text Conventions Used In A Document
It is necessary to wear protective gloves and a face mask. Mandatory action when working with powder. ATTENTION! It is necessary to wash hands after each use of the SANDBLASTER SLS. IMPORTANT! Information essential to correctly perform a specific task. -
Page 4: Safety Information
2. Safety Information The Sinterit SANDBLASTER SLS may create a powerful stream of abrasive particles. To avoid injuries and/or property damage, carefully read the instruction manual before assembling, operating or performing maintenance of the sandblaster. While operating the machine, please exercise your common sense at all times. -
Page 5: Power Supply
• Check that all components of the Sinterit SANDBLASTER SLS are properly sealed. • Check the machine for defects previous to each use, in case of a defect, or when the machine does not function properly, first have it repaired by a specialized person/company. -
Page 6: Contents Of The Sinterit Sandblaster Sls Pack
PVC foam tape / PVC protective tape / Pipe end cap 3.2 Others accessories Control pedal’s pneumatic tubings / Control pedal / Replaceable PE protective foil for SANDBLASTER SLS viewing window (5 pcs.) 6 | Sinterit SANDBLASTER SLS User Manual... -
Page 7: Sinterit Sandblaster Sls
PE protective foils for the viewing window (5 pcs.) Static nozzle Static nozzle pneumatic tubings Inner air blow gun Inner air blow gun pneumatic tubings Inner chamber grid Inner T-type push-in pneumatic fitting (for Inner air blow gun) Sinterit SANDBLASTER SLS User Manual | 7... -
Page 8: Specification
Certificates CE PACKAGING Size 790 x 545 x 765 [mm] (31.1 x 21.5 x 30.1 [in]) Weight 45 [kg] (99.0 [lbs]) Package contains Sandblaster, 8 [kg] (17.6 [lbs]) of abrasive material, manual and accessories 8 | Sinterit SANDBLASTER SLS User Manual... -
Page 9: Safety Plate
7. Screw on the Air filter using the Filter screw . Use the allen wrench included in the accessories box. 8. You can use Sandblaster SLS with or without Sinterit ATEX Vacuum Cleaner. Sinterit SANDBLASTER SLS User Manual | 9... - Page 10 • Sandblasting without Sinterit ATEX Vacuum Cleaner Detach the Antistatic hose from the Sandblaster SLS using a 10 mm Wrench Insert the Pipe end cap into the Antistatic hose socket IMPORTANT! Sandblasting with ATEX Vacuum Cleaner to provide a dustless environment around and inside the Sandblaster.
- Page 11 NO COLLAR (A) - BLACK TUBING RED COLLAR (P) - RED TUBING Image 6. Correct connection of the Control pedal pneumatic tubings to the Sinterit SANDBLASTER SLS. ATTENTION! • Before starting any work with an Abrasive material, always wear Protective Glasses, Protective dust mask, and optional gloves.
-
Page 12: Sandblasting The Printouts
Before starting any work with Sinterit SANDBLASTER SLS, always wear Protective glasses, Protective dust mask, and optional gloves. • You can use use the “PERSONAL PROTECTION” set included with Sinterit Lisa printers. ATTENTION! • It is strongly forbidden to start sandblasting when the sandblaster is not fully closed (open door) or when LED light is not on. - Page 13 (available in the Accessory box). • Nozzles smaller than No. 5 do not work precisely with the Sinterit Abrasive material. • A bigger size ceramic nozzle gets the job done faster because it can blast a larger surface, this also causes a higher air consumption.
-
Page 14: Maintenance Of The Sinterit Sandblaster Sls
7. Maintenance of the Sinterit SANDBLASTER SLS WARNING! Before replacing the accessories or beginning the assembly, repair, transport, or any form of maintenance, disconnect the Sinterit SANDBLASTER SLS from the compressor, turn off the machine and unplug it from the power source. Check before each use: 1. -
Page 15: Exchange Of Abrasive Material With Sinterit Atex Vacuum Cleaner
7.1.1 Exchange of Abrasive material with Sinterit ATEX Vacuum Cleaner To remove the used Abrasive material from the chamber we recommend using Sinterit ATEX Vacuum Cleaner. Image 9. Remowing used Abrasive material with ATEX Vacuum Cleaner. 1. Disconnect the sandblaster from the power supply and the compressor 2. -
Page 16: Replacement Of The Ceramic Nozzle From The Inner Air Blow Gun
, which is placed on the Viewing window (inside the chamber). This can easily be replaced by new foil (the five spare PE protective foils are available in additional accessories of the Sinterit SANDBLASTER SLS). • Remove the old PE protective foil •... - Page 17 Check if the Venturi tube is correctly installed in the Static Nozzle or if it is not clogged. Check if the Venturi tube is correctly installed in the Static Nozzle or if it is not clogged. Sinterit SANDBLASTER SLS User Manual | 17...
-
Page 18: General Legal Information
9. General legal information Where this manual refers to Sinterit or the Company, this means Sinterit sp. z o.o. with its legal seat in Krakow, registered by the District Court for Kraków-Śródmieście in Krakow, XI Commercial Division of the National Court Register under number: 535095, NIP (tax number): 6793106416, with the share capital for a date of publication of this manual of PLN 102,050 (say: one hundred and two thousand and fifty). -
Page 19: Terms Of Warranty
The terms of the warranty are set forth in the agreement between the buyer and the Company. In case of a purchase made in the Sinterit online shop, the terms of the guarantee are specified in the Terms and Conditions, subject to the acceptance of the Customer before placing an order. - Page 20 SINTERIT Sp. z o.o. ul. Nad Drwina 10 bud. B3, 30-741 Krakow, Poland www.sinterit.com Contact: +48 570 967 854...
Need help?
Do you have a question about the SANDBLASTER SLS and is the answer not in the manual?
Questions and answers