Scrapping; Contents Of Powder Handling Station Packaging - SINTERIT POWDER HANDLING STATION User Manual

I.

SCRAPPING

3.

Contents of Powder Handling Station packaging

II
III
IV
Zone II: PHS User manual, Anti-noise headphones, Box with additional accessories:
17/10, G Allen key Hex 5mm,
11 | POWDER HANDLING STATION Manual
IMPORTANT!
In the case of scrapping, all the parts of the device will have to be disposed of
through adequate disposal channels by applicable legislation. Before scrapping,
all plastic and rubber parts will have to be separated from the electrical material.
Parts made of plastic, aluminum, and steel only may be recycled if collected by
special centers.
I
V
VI
E
D
H
Zone I: Components of the Metal shelf with screws 13, Power cable.
H General-purpose nozzle,
Zone III: Spare Metal container with lid.
Zone IV: Suction hose with Suction Handle
Zone V: Additional Powder Chamber grid (for cleaning small parts).
Zone VI: Components of the Slope ramp
ZONE I
ZONE II
POWDER HANDLING STATION
INSTRUKCJA OBSŁUGI
Przed użyciem urządzenia należy przeczytać instrukcję obsługi.
Wersja 1.0/2020
BOX OF
ACCESSORIES
FOR PHS
ZONE VI
F
G
J
I
D
I Powder suction nozzle form cake,
x1
x8
x2
III
IV
K
Powder Wiper, E Tube brush,
J Gap nozzle,
4 .
A .
V
F Service wrench
K PVC brush.