Initial Startup Of The Sinterit Phs After Delivery - SINTERIT POWDER HANDLING STATION User Manual

Noise level without vacuum cleaner <60 [dB]
Equivalent continuous sound
pressure level (8 hours)
Sound pressure level (A) 63,7 [dB]
Peak sound pressure level (C) 81,4 [dB]
Sound power level (A) 79,6 [dB]
Suction inlet 40 [mm]
Capacity of collection unit 12 [L] (3.17 [gal])
Certificates CE
IEC Protection Class Class 1
5.

Initial startup of the Sinterit PHS after delivery

WARNING!
The device weighs above 150 kg. Two adults will be needed to unpack the PHS device properly and
safely.
ATTENTION!
•
Visually check if the package does not have any visible damage to the protective packaging
that may arise during transport. If any, contact Sinterit Technical Support immediately (https://
www.sinterit.com/support-page).
•
The device must be properly installed according to these instructions before use.
IMPORTANT!
The tools: Powder Tools, IO Box, Powder Funnel, Trowel are not supplied with the PHS. They are
included in the accessories of the Sinterit Lisa and Lisa PRO printers.
IMPORTANT!
During installation, watch out for the metal edges of the device. Wear Protective
Gloves.
73,9 [dB]
IP Code IP 30
SAFETY
POWDER HANDLING STATION Manual | 14