6.
Troubleshooting - mattress heating
6.1
General information
The DS mode contains the following functions:
-
Error list:
Whenever an error is detected, an error number is stored in an error list
together with the error frequency (max. 15). The error list can be read out
and deleted.
-
Diagnosis mode:
The following can be implemented in diagnosis mode:
o
o
o
-
4 Service LEDs on Controller PCB
o
o
6132.200
Babytherm 8000
Readout and setting of elapsed time meter
Readout of all A/D converter channels and mono-times
Actuation of safety relay and heating
One LED indicates status of processor
Three LEDs are assigned various functions depending on operating
status
Repair Instructions
04.01
Page 69 of 115