Removing The Pairing; Via Wifi; Installation Of The Wifi Option In The Platform - Viavi SmartOTDR 100 User Manual

Chapter 7 Connectivity
Establishing connection
Removing the
Pairing

Via Wifi

Installation of the
WIFI option in the
Platform
56
a Select the device to be paired with the Platform
It will be underlined in blue
b Push the Pair key to connect the device to the Platform
2 If prompted, enter a pairing code. The code must be identical on the
SmartOTDR and the device.
3 Once the bluetooth device and the Platform are paired, a screen is
displayed with the description of the device (see
page 55).
The icon has a blue background when paired with a device
versus no background when not paired
You can now go to the file explorer and transfer files from the Smar-
tOTDR toward the bluetooth device and vice versa (see
files via Bluetooth" on page
via Bluetooth (see "Transferring files to/from a PC via WIFI" on page
1 To remove the pairing between the two equipments
2 From the Home page, press Connectivity > Bluetooth.
3 Push the Remove pairing key
The icon on the upper banner of the screen becomes
Platform is no more connected to a bluetooth device, but the Bluetooth
option is still active.
To deactivate the bluetooth onto the Platform, press Bluetooth menu key
to disable the interface.
The WIFI application is available on option with the SmartOTDR, ref
E10WIFI.
The WIFI option is delivered on a USB key to be connected to the WIFI
board which will be inserted into the SmartOTDR.
To install the WIFI option onto the Platform:
1 Switch off the SmartOTDR and, if necessary, unplug it from mains.
2 Remove the cover on the underside of the Platform, unscrewing the
two screws.
If the board is already set into the Platform, follow instructions on
step 4.
3 Insert the board, pressing it gently but firmly, taking care to the
connectors.
User Manual 7SMART102 Rev002
.
77) or transfer the Platform interface on VNC
Figure 32 on
,
"Transferring
78).
showing the