Table of Contents
Advertisement
Chapter 7 Connectivity
Stratasync
Instruments are dialed in:
the latest configurations
and software
Configuring
and
synchronizing
the SmartOTDR
84
StrataSync improves technician and instrument efficiency.
StrataSync allows to:
–
Manages and tracks test instruments
–
Collects and analyzes results from the entire network
–
Informs and trains the workforce
Techs are empowered:
"right the first time" with
the latest test instruction
Fig. 64
Principle of the Stratasync application
Pre-requisites for using the Stratasync with the SmartOTDR
The user must have subscribed to Stratasync, and by consequence, he
must have acquired an account Identifier and a password.
The Ethernet and Proxy parameters must have been correctly configured
in the System Settings page of the SmartOTDR (see
on page 62
and
"Proxy > Use proxy" on page
The SmartOTDR can be configured to be synchronized with the Strata-
sync.
1
On the Home page, press Connectivity.
2
Check the configuration of the Ethernet and Proxy parameters (see
"Configuring the SmartOTDR via Ethernet" on page 61
3
In the Connectivity windows, press Stratasync
4
Configure the Stratasync parameters:
a
In the Server Type parameter, the Viavi Server is selected by
default and it is recommended to keep this parameter.
However, the user can select if necessary the Server Name
User Manual
7SMART102 Rev002
Visibility throughout
the entire network: all
results are immediately
useful
Lots of data in
"Ethernet > Mode"
63).
Simple
data out
.
Advertisement
Table of Contents
Troubleshooting
