Adding An Application To A Task; Adding Weighing And Print Profiles; To A Task; Preparing Weighings - Sartorius Cubis MCA Series Operating Instructions Manual

8.4.2

Adding an Application to a Task

Applications must be added to a task so that they can run.
Procedure
Open Task Management.
t
Press the [New] button.
t
A list of all activated applications is displayed.
y
To select an application: Press the desired application.
t
The wizard for creating a new task starts.
y
Follow the wizard's instructions in the operating display.
t
8.5 Adding Weighing and Print Profiles to a Task
To be able to use a print or weighing profile: Add a print or weighing profile

to a task.

Procedure
Open Task Management.
t
Create or edit a task. In order to do so, start the wizard to create or edit
t
a task and follow the wizard's instructions in the operating display.
8.6

Preparing Weighings

The device must be prepared before every weighing.
Procedure
Level the device.
t
Zero the device. In order to do so, press the [Zero] button.
t
If the device cannot be zeroed: Remove the sample to be weighed
t
and re-zero the device.
Calibrate the device.
t
Operation
Operating Instructions Cubis MCA 75
®