Safety Instructions; Intended Use; Modifications To The Device; Repairs To The Device - Sartorius Cubis MCA Series Operating Instructions Manual

Safety Instructions

8 Operating Instructions Cubis
2 Safety Instructions
2.1

Intended Use

The device is a high-resolution balance, which can be used in laboratories.
The device was developed to accurately determine the mass of materials
in liquid, paste, powder, or solid form.
Appropriate containers must be used for loading each type of material.
The device can be used in stand-alone operation or can be operated
on a PC.
The device is exclusively designed for use in accordance with these
instructions. Any further use beyond this is considered improper.
If the device is not used properly: The protective systems of the device
may be impaired. This can lead to unforeseeable personal injury
or property damage.
Operating Conditions for the Device
Do not use the device in potentially explosive environments. Only use
the device indoors.
The device may only be used with the equipment and under the operating
conditions described in the Technical Data section of these instructions.
2.1.1

Modifications to the Device

If the device is modified, for example by attaching extra components:
Device safety may be affected, or the device may cease to be compliant.
If you have any queries regarding modifications to the device,
contact Sartorius.
2.1.2

Repairs to the Device

Device repairs may only be carried out by persons with appropriate
specialized knowledge of the device. If the device is not repaired by
a specialist: The safety of the device may be impaired or the quality marks
may lose their validity.
We recommend that any repair work, even that not covered by the warranty,
is carried out by Sartorius Service or after consulting with Sartorius Service.
MCA
®