Adding An Application To A Task; Adding Weighing And Print Profiles To A Task; Preparing Weighings - Sartorius Cubis MCA10202S Series Operating Instructions Manual

Operation
60 Cubis ® MCA Operating Instructions
If an individual application from the displayed QAPP package is to be activated:
t
Press the desired application .
t
A display opens containing details about the selected application .
y
Press the [License] button .
t
The input field for the license key appears .
y
If an additional cost is associated with the application: Enter the license key
t
in the entry field and press the [OK] button .
If no additional cost is associated with the application: Press the [OK] button .
t
8.4.2

Adding an Application to a Task

Applications must be added to a task so that they can run .
Procedure
Open Task Management .
t
Press the [New] button .
t
A list of all activated applications is displayed .
y
To select an application: Press the desired application .
t
The wizard for creating a new task starts .
y
Follow the wizard's instructions in the operating display .
t
8.5

Adding Weighing and Print Profiles to a Task

To be able to use a weighing or print profile: Add a weighing or print profile to a
task . Weighing and print profiles can be configured in the Settings menu .
Procedure
Open the task .
t
Create or edit a task .
t
8.6

Preparing Weighings

The device must be prepared before every weighing .
Procedure
Level the device .
t
Zero the device . In order to do so, press the [Zero] button .
t
If the device cannot be zeroed: Remove the sample to be weighed and re-zero
t
the device .
Calibrate the device .
t