Angelo Po 190TP0 Use And Installation Manual page 43

SWITCHING THE TOP BURNER ON AND OFF
Lighting
1 - Turn on the gas supply tap.
2 - Press the knob (A) and turn it anti-clockwise
(pos. 1) to light the pilot light.
3 - Keep the knob pressed for about 15 sec. to
prime the thermocouple.
4 - Turn the knob anti-clockwise (pos. 2) to light the
burner.
5 - Turn the knob gradually anti-clockwise to adjust
the power of the flame down to the minimum
setting.
Turning off
1 - Turn the knob clockwise (pos. 3) to turn the
burner off. The pilot light will remain on to allow
the burner to be re-lit.
2 - Turn the knob clockwise (pos. 4) to turn off the
pilot light.
3 - Turn off the knob to ensure safety.
SWITCHING THE OVEN ON AND OFF
Lighting
Important
At first switch-on, preheat as appropriate.
1 - Turn on the gas supply tap.
2 - Press the knob (A) and turn it anti-clockwise
(pos. 1), while keeping button (B) pressed, to
light the pilot light.
3 - Keep the knob pressed for about 15 sec. to
prime the thermocouple. The pilot light can also
be lit by hand through the hatch (C).
4 - Turn the knob anti-clockwise (pos. 2) to be-
tween the minimum and maximum temperature
and wait for the warm-up time before using the
oven (see table).
Min
Temperature °C 100 140 180 210 240 270 300
Time in minutes 6' 8'
Max
10' 12' 14' 16' 18'
A
IDM-39614800900.tif
- 11 -
1
4
IDM-39614800800.tif
A
1
C
2
3
4
2
3
IT
B
GB
DE
FR
ES
English