Securing The Wheelchair With A 4-Point Belt Restraint System; Fig. 36: Rear Attachment Points; Fig. 37: Front Attachment Points - Paravan WHEELCHAIR Series Operating Instructions Manual

14.4

Securing the wheelchair with a 4-point belt restraint system

Tension belts compliant with ISO 10542-1 are only tested up to 85 kg plus the weight of the person.
It is recommended that a 4-point belt restraint system be used that is designed for the total weight of the
wheelchair including all options, 2 at the front and 2 at the rear, which comply with ISO 10542-1. If using a
standard 4-point tension belt to secure a wheelchair that is heavier than 85 kg, 6 belts must be used to secure
the wheelchair in place: 2 at the front and 4 at the rear.
Recommended angle for tension belts.

Fig. 36: Rear attachment points

Fig. 37: Front attachment points

78
Loading and transporting the power wheelchair