CHAPTER 2 Setting up the Phone
Wall Mounting
The documentation following shows how to mount the phone on a wall.
➢
To mount the phone on a wall:
1.
Attach the stand of the phone for the purpose of a wall mounting:
a.
Detach the base.
b.
Attach it again as you did for a desktop mounting (see
page) only now make sure that it's flatly aligned to lie flush against the wall, i.e., slide the
inner rails of the phone stand onto the phone base's inner notches.
2.
Connect the AC power adapter, LAN and PC/laptop cords.
3.
In the wall, drill two horizontal holes at a distance of 3 15/16 inches (100 mm) from one another,
in line with the template.
4.
Insert two masonry anchors into the holes if necessary.
5.
Thread two screws (not supplied) into the two masonary anchors; ensure that the heads extend
sufficiently (about 3/16 inch or 5 mm from the wall) for the phone stand's keyhole slots to hang
on.
6.
Hang the phone stand's keyhole slots on these screws.
C450HD IP Phone for Microsoft Teams Application User's and Administrator's Guide
- 9 -
Desktop Mounting
on the previous