Cabling; Mounting The Phone; Desktop Mounting; Wall Mounting - AudioCodes 400HD Series User's And Administrator's Manual

CHAPTER 2 Setting up the Phone

Cabling

See the phone's Quick Guide shipped with the device and also available from AudioCodes for
detailed information on how to cable the phone.

Mounting the Phone

The phone can be mounted on a:
■
Desk (see Desktop Mounting below )
■
Wall (see Wall Mounting below )
See the phone's Quick Guide shipped with the device and also available from AudioCodes for
detailed information on how to mount the phone.
See also here
principle is the same across all AudioCodes IP phones.

Desktop Mounting

The following documentation shows how to mount the phone on a flat surface like a desk.
➢ To mount the phone on a flat surface like a desk:
1. Off-hook the handset (if on-hook) and place the phone upside down, i.e., base-up, on
your desktop.
2. On the phone's stand, identify outer notches.
3.
On the phone's base, identify outer rails.
4. Invert the stand and align its outer notches with the base's outer rails.
5. Insert the stand's outer notches into the base's outer rails and slide the notches along the
rails until the stand click-locks into the base.
6. Revert the phone and stand it on the desktop.

Wall Mounting

The following documentation shows how to mount the phone on a wall.
f or a clip showing the principle of how to mount an AudioCodes IP phone. The
C448HD and C450HD | Users & Administrator's Manual
- 17 -