Note:
If the LAN to which the phone is connected supports Power over Ethernet (PoE), no
AC adapter is required; the phone receives power from the Ethernet network.
Prior to connecting power, refer to the Compliancy and Regulatory Information at
www.audiocodes.com/library.
2.4
Mounting the Phone
The phone can be mounted on a:
Desk (see Section
Wall (see Section 2.4.2)
See also
https://www.youtube.com/watch?v=oGe9STB9lFE
2.4.1
Desktop Mounting
This section shows how to mount the phone on a flat surface like a desk.
To mount the phone on a flat surface like a desk:
1.
Off-hook the handset (if on-hook) and place the phone upside down, i.e., base-up, on your
desktop.
2.
On the phone's stand, identify outer notches.
3.
On the phone's base, identify outer rails.
4.
Invert the stand and align its outer notches with the base's outer rails.
5.
Insert the stand's outer notches into the base's outer rails and slide the notches along the
rails until the stand click-locks into the base.
6.
Revert the phone and stand it on the desktop.
2.4.1.1
Routing the Handset Cable
The phone features a groove for routing the handset cable.
2.4.2
Wall Mounting
This section shows how to mount the phone on a wall.
To mount the phone on a wall:
1.
Attach the stand of the phone for the purpose of a wall mounting:
a.
Detach the base.
User's and Administrator's Manual
2.4.1
below)
16
450HD IP Phone
to assemble the base stand.
Document #: LTRT-13263