FLIR Elara DX Series Installation And User Manual page 42

Operation
·
Create and manage a tour of preset positions (only available if presets have been defined):
To create a tour, click Create Tour. For
each tour stop, click Add, select a
preset, and define the amount of time in
seconds the tour stops at the preset.
You can also move tour stops up or
down in the list and delete tour stops.
After you create a tour, you can start
, pause , stop edit, or delete it.
,
Advanced Settings
·
Startup Mode—You can specify that when the camera starts up, it
automatically starts the tour of preset positions.
·
Mechanical Flip—Disable or enable the camera's mechanic flip feature. By
default, Mechanical Flip is set to On and the camera can continuously track
an object passing under the camera. When a tilting camera reaches its
maximum angle, it pans 180° and then continues tilting to keep tracking the
object.
Note
If a preset position or a point for another function (for example, a tour) is set
to a position that can only be reached by flipping the camera, when
Mechanical Flip is set to Off, the camera cannot reach that position.
·
User actions during automatic modes—You can specify the camera's behavior when a user
attempts to manually move the camera during an automatic mode such as a tour:
o None (default)—Disables manual camera movement.
o Exit—The camera exits the automatic mode.
o Exit and Come Back—The camera exits the automatic mode. After the specified Timeout or period
of inactivity, between 1-100 seconds, the cameras resumes the automatic mode.
Where relevant, changing the settings immediately affects the live video and video streams. To save
changes, click Save. To discard changes, click Reset.
427-0300-00-12 - Revision 110 - May 2021
This document does not contain any export-controlled information.
37