FLIR Elara DX Series Installation And User Manual page 10

Camera Overview
Streaming Resolution
Thermal Image
Settings
Thermal AGC Region
of Interest (ROI)
Image Uniformity
Optimization
Ethernet
Network APIs
Digital I/O
System
Audio I/O
Integration
Illumination
Lens Window Wiper
Network Supported Protocols
Pan Angle / Speed
Tilt Angle / Speed
Programmable
Pan / Tilt
Presets
Performance
Preset Accuracy
Sequence & Pattern
Mechanical Flip
Input Voltage
Weight
Dimensions
General
Input/Output
Power Consumption
IP Rating (Dust &
Water Ingress)
Operating
Environmental
Temperature Range
Storage Temperature
Range
Thermal: 640x512 @ 30fps max
Visible: Up to 1080p on each stream at 30 FPS each.
One 4K stream at 30 FPS, or one 4K stream at 15
FPS and second stream in 1080p at 30 FPS.
Auto AGC, Digital Detail Enhancement (DDE),
Brightness, Sharpness, Contrast
Default, presets and user-definable to ensure optimal
image quality on subjects of interest
Automatic Flat-Field Correction (FFC) - Thermal and
Temporal Triggers, and manual FFC
10/100/1000 Mbps
FLIR SDK; FLIR CGI; ONVIF Profile S
Input: Four sets / 5V 10kΩ pull up
Output: Two sets / relay output, 130mA max at 24
VDC / 24 VAC
Bi-directional via terminal block connection
Up to 200m NIR illumination
Distance: Up to 200m (656ft.) | 6° / 30 / 90°
Peak emission wavelength: 850 nm
Wiper is standard and camera is compatible with a
wash kit accessory
IPV4, HTTP, UPnP, DNS, NTP, RTSP, RTP, TCP,
UDP, ICMP, IGMP, DHCP, ARP
Continuous 360° - 0.1° to 90°/sec
-10° to 190° - 0.1° to 60°/sec
256
0.25°
8 each
Enable / disable
24 VAC (±10%)
Universal Power over Ethernet (PoE) 60W 4 pair
forced mode, no support for CDP/LLDP
9.12 kg (20.1lb)
Diameter: 275mm (10.8in)
Height: 368mm (14.5in)
Input: Four sets / 5V 10kΩ pull up
Output: Two sets / relay output, 130mA max at 24
VDC / 24 VAC
24 VAC max: 61W
PoE max: 43W
IP66
-40°C to 60°C
-55°C to 85°C
427-0300-00-12 - Revision 110 - May 2021
This document does not contain any export-controlled information.
5