Illumination Page; Osd Page; Wiper Page - FLIR Elara DX Series Installation And User Manual

Operation
3.8

Illumination Page

The camera features NIR illumination for the visible light camera.
By default, infrared illumination is set to Auto; when the scene
becomes dark enough, the infrared illumination turns on and the
visible camera video changes to night mode (black and white
video). You can set the night-to-day and day-to-night thresholds
on the Visible Page.
You can set the infrared illumination to Off.
To save a change to the setting as the power-cycle default, click
Save.
3.9

OSD Page

The OSD page provides separate on-screen display settings for
visible and thermal video. The camera can overlay onto the video its
name and the date and time:
·
with either black or white text
·
with or without a contrasting background
·
in small, medium, or large size
Changes to OSD settings immediately take effect.
3.10

Wiper Page

The following settings and operations are available from the Wiper page :
·
Wiper—Activates the camera lens window wiper. Click Start for one full wiper cycle.
Caution
Before activating the wiper, make sure the lens windows are wet. Using the wiper when the windows
are dry causes irreparable damage to the window coatings and voids the warranty. Use the wiper
with an optional wash
Thermal video with OSD
kit, wait until it rains, or spray the lens windows with a hose.
427-0300-00-12 - Revision 110 - May 2021
This document does not contain any export-controlled information.
38