Installation
Pendant Cap Screw
8. Securely tighten the pendant cap screw into the camera. The screw prevents the camera from
rotating.
9. Try to rotate the camera and make sure it is not possible to rotate the camera.
Warning:
If the camera can be rotated, it could become loose and fall.
2.6.2
Wall Mount Bracket CX-ARMX-G3
Wall mount bracket (1.5 inch threaded).
Item
Wall mount bracket
Parts package
Quick install guide
Details
CX-ARMX-G3
No. 3 Allen key
Sponge
Summarized below
427-0300-00-12 - Revision 110 - May 2021
This document does not contain any export-controlled information.
Pendant Cap Screw Holes on Camera
Qty
1
1
2
1
12