FLIR Elara DX Series Installation And User Manual page 26

Installation
In the DNA Discover List, verify that the camera's status is Online.
If this is the first time you are configuring the camera or if it is the first time after resetting the camera
to its factory defaults, DNA automatically authenticates the camera with the default password for the
camera's admin user (admin).
If the admin user password has been changed, you need to authenticate the camera.
In the DNA Discover List, right-click the camera and select Login.
In the DNA - Login window, type the password for the admin user. If you do not know the admin
user password, contact the person who configured the camera's users and passwords.
Click Login, wait for
In the DNA Discover List, verify that the camera's status is Authenticated.
3. Change the camera's IP address.
Right-click the camera and select IP Setup.
In the DNA - IP Setup window, clear Use DHCP and
specify the camera's IP address. You can also specify
the Mask (default: 255.255.255.0) and Gateway. Then,
click Update, wait for
click Close.
To manually specify the camera's IP address using the camera's web page:
1. Access the camera's web
Ok status to appear, and then click Close.
Ok status to appear, and then
page.
427-0300-00-12 - Revision 110 - May 2021
This document does not contain any export-controlled information.
21