Ptz Page - FLIR Elara DX Series Installation And User Manual

Operation
3.7

PTZ Page

Use the PTZ page to:
·
Move the camera left, right, up, or down (pan and tilt)
·
Define the pan and tilt speed, between 1x-10x
·
Zoom in and out—click once or click and hold for continuous zoom
·
Go to the camera's home position
·
Set the camera's current position as its home position
·
Define preset positions:
a. Under Preset Position, click Set
Preset.
b. Select a preset index number from
1-128. Selecting an index number
currently associated with a preset
position overwrites the existing
preset position.
c. Specify a unique, descriptive name
for the preset position. You can use
alphanumeric characters,
underscores (_), or dashes (-).
d. Click Set. The camera adds the
current position as a preset.
Preset positions are relative to the camera's orientation, which is defined on the
the camera's orientation changes and presets have been defined, redefine them with the new
orientation setting.
·
Move the camera to a preset position, edit a preset name, or delete a preset:
Under Preset Position, click Presets.
The list of presets appears, in
ascending index number order.
427-0300-00-12 - Revision 110 - May 2021
This document does not contain any export-controlled information.
Georeference Page. If
36