Tau Wfov Locking Ring And Tool; Tripod Mount For Tau Camera; Photon Replicator Board - FLIR Tau Camera TAU-0035-00-10 User Manual

Tau User's Manual
2.3

Tau WFOV Locking Ring and Tool

Tau Locking Ring Accessory,
421-0041-00
Lock Nut Tool,
421-0042-00
Type 2 - 025 O-ring
(not included)
The locking ring is designed to mount a Tau WFOV
camera into a bulkhead. The M29 x 1.0 thread on the
outside of the lens mount flange is placed through the
clearance hole in the bulkhead and the o-ring seals the
camera to the face.
The Type 2-025 O-ring is not for sale through FLIR. This is
a standard o-ring available from many suppliers.
The locking ring accessory is made of Delrin so as not to
scratch the Tau camera lens flange. Scratching the
external plating can compromise the coating and make
the Tau camera more susceptible to corrosion. The lock
nut tool will attach to a torque wrench for proper
tightening. Torque the locking ring to 4.0 in-lbs.
2.4

Tripod Mount for Tau Camera

Tripod mount,
261-2071-00
This accessory adapts two of the mounting points on the
Tau camera to a standard 1/4
plate. The tripod adapter mounts to the bottom of Tau
camera using two furnished socket head screws.
2.5

Photon Replicator Board

Photon Replicator Board,
421-0040-00
This expansion board adapts the Tau camera's native
50-pin Hirose connector to the 30-pin SAMTEC
connector used on FLIR's Photon cameras. The
replicator board makes the Tau camera electrically pin-
compatible to a Photon camera, including the provision
for operating the Tau camera over a similar input
voltage range as the Photon camera: 6.5-27 VDC.
A cast magnesium spacer and 4 socket-head machine
screws are included (not shown).
TAU-0035-00-10, version 150
"
x 20 tripod mounting
June 2011
2—Optional Tau Camera Accessories
2-3