Troubleshooting and Maintenance
Faults
Message
on display of SM-DIN
module
Labels
.Program.
and
.Error..
blinking on display of
SMART terminal.
If the fault is not included in the above table, please contact your local BTSR
!
dealer, giving a detailed description of the fault and the conditions in which
it occurred. When the BTSR Technical Service intervention is required,
before calling, you are kindly recommended to take note of the code printed
on the defective sensor(s), on the SM-DIN module(s) and/or on the SMART
KNIT terminal, as such information will make diagnoses for the BTSR
technicians easier. Example:
Sensor Code:
Terminal Code: SMART KNIT 0705 000174
Causes
RAM or EPROM error
on SM-DIN module.
Error during the
parameter
programming phase.
IS3F-485 0805 00057
SMART KNIT
Solutions
! Press
If the problem persists, replace the
involved SM-DIN module.
If the error E00 persists, then it could
be necessary to replace the lithium
backup battery.
! Check the programming parameters
of BOARDS and FEEDS functions.
- 4.3 -
Need help?
Do you have a question about the SMART KNIT and is the answer not in the manual?