Software Configuration; Application; Software Installation - Ametek AN-3100D Installation And Configuration Manual

S
OFTWARE
A
PPLICATION
The AN-3100D Annunciator Configuration application is used to create, edit and
download annunciator configurations from a PC. The PC Comm Port connects
directly to the annunciator via a serial port on the front of the CSM module.
A configuration may be created on the PC without a connection to the
annunciator and then downloaded later. The configuration information is held as
a file on the PC, which may be edited if a change is required. An exception to
this is the physical size of the annunciator, which includes the number of input
modules, and the size of each module, which is factory configured.
If a configuration is edited, checks are made to ensure that the correct file is
downloaded to the annunciator. If more than one version of the AN-3100D
configuration software is used then more than one version of the configuration
file can exist. It is up to the user to ensure that copies of the configuration are
kept up to date. If the application detects that the local and remote copies of a
configuration are different the user can update either.
The application also includes a function to enable the configurable options in the
annunciator, such as Modbus and DNP communications.
S I
OFTWARE NSTALLATION
The AN-3100D configuration software should be installed onto a PC with the
following minimum configuration: -
300MHz Pentium II CPU
Windows 98/2000/XP
64Mbytes RAM
20Gbytes hard disk
Insert the AMETEK AN-3100D Configuration CD in the CD-ROM drive. This will
automatically start the installation process. If this does not happen choose 'Run'
from the 'Start' menu then browse to the CD-ROM drive and click on
'Autorun.exe'.
During the installation, you will be prompted to select the type of Annunciator
you wish to configure. Select only the models you wish to use to avoid confusion
with extra choices.
AN-3100D ANNUNCIATOR INSTALLATION AND CONFIGURATION MANUAL
C
ONFIGURATION
i. 57