Module Cell Configurations; Annunciator Windows - Ametek AN-3100D Installation And Configuration Manual

Module Cell Configurations

CSM CELL
Front View
SLOT 1
CSM MODULE
SLOT 2
COMMUNICATIONS MODULE
SERIAL OR ETHERNET
Note: Slot 5 of the I/O cell is also used for a row to row interconnect board (item
#10 on cell assembly figure), which is installed for every row of the Annunciator.
When installed; no other card or power supply can be inserted in that slot. All
other unused slot 5 positions in that row can be used for power supplies or a
ground detector. (This will be factory configured)

Annunciator Windows

The Annunciator windows come in four sizes as shown below. Legends can be
laser printed on transparency film and inserted into the window frame. Colored
filters are inserted behind the legends. Reference the appendix for additional
details.
FULL SIZE
WINDOW
3.0" H x 3.0" W
(76mm H x 76mm W)
AN-3100D ANNUNCIATOR INSTALLATION AND CONFIGURATION MANUAL
SLOT 3
SLOT 4
I/O MODULE
INTEGRAL POWER SUPPLY
OR IRIG-B MODULE
HALF SIZE
WINDOWS
1.5" H x 3.0" W
(38mm H x 76mm W)
I/O CELL
Front View
SLOT 1 & 3
I/O MODULES
THIRD SIZE
WINDOWS
1.0" H x 3.0" W
(25mm H x 76mm W)
i.
SLOT 4
INTEGRAL POWER SUPPLY
OR
INTEGRAL FCV SUPPLY
OR
GROUND DECTOR
QUAD SIZE
WINDOWS
0.75" H x 0.75" W
(19mm H x 19 mm W)
3