Integral Power Supply - Ametek AN-3100D Installation And Configuration Manual

Integral Power Supply

The Integral Power Supply is installed in slot 5 of the I/O or CSM Cell depending
on the configuration and input power required. The Integral Power Supply
provides a 5VDC output used for the Annunciator Logic and LED's. There are
three different types of Integral Power Supplies available:
24VDC
48VDC
Universal 125VDC/120/230VAC.
Integral Power Supply Cell Locations
Customer Input Power
24 VDC
48 VDC
125 VDC or 120/230
VAC
Based on the size of the system, there could be several integral power supplies
within the Annunciator. The location of integral power supplies within the
Annunciator can be noted by the five position terminal block, TB5.
TB5
Power Input
Terminal Block
AN-3100D ANNUNCIATOR INSTALLATION AND CONFIGURATION MANUAL
CSM Cell with CSM Cell with
Integral one I/O
Pushbuttons Module
X X
X X
X
i.
I/O Cell with I/O Cell with
one I/O two I/O
Module Modules
X X
X X
X
47