Window Assembly Details; Window Legends; Window Colors - Ametek AN-3100D Installation And Configuration Manual

A
PPENDIX
W A
INDOW SSEMBLY
The Annunciator uses a common window assembly for all window
configurations. The different window options are created using dividers (for the 4
window sizes) and colored filters for the different window colors (white, red, blue,
green, amber, yellow). The assembly drawings on the next page identify the
different options available.
A typical window consists of the following parts:
•
Transparency film with Legends
•
Colored Filter if required (red, blue, green, amber, yellow)
•
White Diffusers (to eliminate LED hotspots)
All of these parts are pressed into the clear window, which is inserted into the
window frame.

Window Legends

The Annunciator Window Legends are typically printed on clear transparency
film, which is provided with the Annunciator. There is an option to engrave these
legends directly on the window (Option E). For printing of legends on the
transparency film, the Software CD will include a template in Microsoft Excel.
You type the legend in the window template that matches your size window and
print on a suitable printer. (A laser printer is recommended or any type that is
compatible with printing on Transparency film.)

Window Colors

The Annunciator Window Colors are provided through colored filters, which are
provided with the Annunciator. In cases where several different window colors
are required for an individual Cell (option IMC), the laser printed transparency
will be colored in place of the color filters. In these cases, color Laser Printer
should be used.
Note: All legends and pre-printed colors will be provided with the Annunciator if
the details are provided before the unit ships.
AN-3100D ANNUNCIATOR INSTALLATION AND CONFIGURATION MANUAL
E
D
ETAILS
i. 121