Field Contact Voltage (Fcv) - Ametek AN-3100D Installation And Configuration Manual

Field Contact Voltage (FCV)

Refer to Table-1 Module Types above to determine the type of FCV
configuration installed.
I/O modules with the part number starting with 1085- supports Field Contact
Voltages of 12, 24, 48, 125 through Jumper P1. The Field Contact Voltage can
be selected as Common throughout the whole system or Isolated from input to
input. This is selected via jumpers J1 & J2.
I/O modules with the part number starting with 1087- supports Field Contact
Voltages with a range of 24 through 125Vdc with no need for configuration
jumpers. The Field Contact Voltage can be selected as Common throughout
the whole system or Isolated from input to input. This is selected via jumpers J1
& J2.
NOTE: The Annunciator is already factory configured per the selections in the
model number.
8 AN-3100D ANNUNCIATOR INSTALLATION AND CONFIGURATION MANUAL