Product Overview; Safety - Ametek AN-3100D Installation And Configuration Manual

P O
RODUCT

SAFETY

The following safety symbols are used on the AN-3100D:
Caution, risk of danger. Refer to the Instruction Manual.
Caution, risk of electric shock.
Protective Earth Conductor Terminal
The AN-3100D is CE certified for operation under the following conditions:
Indoor Use (unless mounted in NEMA-4 enclosure option)
Altitude up to 2000 m
Operating Temperature Range:
Relative Humidity:
Mains supply voltage fluctuations:
Transient Over voltages:
Category II)
Pollution Degree 2
In product configurations with 125VDC or 120VAC Field Contact Voltage
(options: D, DC, D/ISO, Y/ISO), the system must be equipped with the lockable
front door (options NCB, NCT) or NEMA Enclosure (options N4, N4PB)
Annunciator Model Code Definition on page 4.
For FM option (refer to option codes), the required door may be supplied by
Ametek, a panel shop or the customer. The door must meet the FM standard
for requiring a tool to open or remove the door to allow access to the front of the
Annunciator
.
Also, 120/230VAC & 125 VDC Input Power (options A, B, C) must use external
power supplies, unless the front door or NEMA enclosure is used. All other
product configurations can be installed in any enclosure as specified in the
model number table, item 1.
Installation and start-up must be carried out by trained and qualified personnel.
If the unit is not installed and operated as specified, the protection provided by
AN-3100D ANNUNCIATOR INSTALLATION AND CONFIGURATION MANUAL
VERVIEW
O
-20 TO 50 C (-4 to 122
20-95% RH
+/- 10% of nominal
2500 V (Installation or Measurement
i.
o
F)
1