Assembly; Assembly With Wall Bracket - Weinmann ACCUVAC Basic Description And Operating Instructions

3. Assembly

Important

3.1 Assembly with wall bracket

8
Assembly
ACCUVAC Basic is supplied ready for use.
Before using ACCUVAC Basic for the first time, fully
charge the power pack (see "4.4 Charging
ACCUVAC Basic" on page 16).
To mount ACCUVAC Basic on a wall, use wall
bracket WM 15208, available as an accessory.
1. Find a suitable mounting location on an
1 1 5 m m
1 1 0
m m
2. Hold up the drilling template and level it with a
˘ 3 m m
3. Mark the required screw holes on the mounting
4. Drill the screw holes with a Ø 3 mm drill.
5. Screw the wall bracket on with the screws sup-
6. Push the appliance plug
surface. The outline of the ACCUVAC on the
tical
drilling template shows the space required.
spirit level.
location.
plied.
ble or of the mains/charger unit into the guide rail
of the wall bracket until it engages with the
tongue.
the mounting substrate must be suffi-
Important:
ciently strong to hold the wall bracket and the
ACCUVAC securely in accordance with
CEN 1789 Medical Vehicles and their Equip-
ment - Road Ambulances.
even
of the connection ca-
11
,
ver-