Weinmann ACCUVAC Basic Description And Operating Instructions page 32

28
Troubleshooting
4. Unscrew the holder
tion canister
7
5. Open the case by unscrewing the 6 cross-head
screws. When opening the case, be careful not to
damage the silicone sealing cord.
6. Carefully disconnect the power pack connector
(X1) from the circuit board.
7. Unscrew the power pack holder (4 cross-head
screws).
8. Detach both leads from the power pack
9. Remove the faulty power pack.
Help protect the environment!
Don't throw the old power pack in the garbage
can – take it to a local collection point for environ-
ment-friendly disposal.
10. Attach the two cables to the connections on the
new power pack: red to plus; black to minus.
for the disposable collec-
25
.
18
.
17