Keithley S530 Diagnostic Manual page 9

Integrated test system

Hide thumbs Also See for S530:

S530 Diagnostic Manual

Figure 1: ACS engineer GUI

Operator

Operator mode of the S530 diagnostics is limited in its functionality. Operators are limited to using

diagnostics to load and run diagnostic tests that have been previously created and saved by an

engineer user (see next Figure).

The output of the operator-level diagnostics will display as the testing occurs in the ACS graphical

user interface (GUI), plus a test log and a detailed diagnostic report can be found in the following

default directory after testing is complete:

C:\ACS\Projects\Diagnostic\Reports

S530-906-01 Rev. A / March 2011

Section 1: Introduction to S530 Diagnostics

1-3

Table of Contents