Emergency Stop - Data I/O PSV5000 Operator's Manual

Emergency Stop

To prevent bodily injury or damage to equipment in an emergency, press the
red Emergency Stop (E-Stop) button located on the front and back of the
machine. Pressing an E-Stop button immediately stops motion of the PNP
head and the gantry.
WARNING:
Personal injury or machine damage can result if the Pause button is
used for emergencies. In an emergency, do NOT use the on-screen
Pause button to turn OFF power. PRESSING PAUSE DOES NOT REMOVE
POWER to the system (instead, press the Emergency-Stop button).
Figure 70: There are two Emergency Stop (E-Stop) buttons: on left near
front, and on right near back of the machine
To restart the System
Figure 71: Popup message: Check the E-Stops.
PSV5000 Operator's Manual
—after pressing an E-Stop
■ Stopping the System ≡ Emergency Stop
Electric shock and collision hazards!
- 65 -