Safety Messages and Precautions ■ General Precautions
General Precautions
To avoid possible personal injury or damage to the equipment, please ob-
serve the following practices:
• Only trained personnel should install, maintain, repair, or trou-
• Do not operate the system unless you have been thoroughly trained,
• Do not operate the system if the safety shield doors or access doors
• Do not operate while servicing, replacing, or adjusting any compo-
• Do not place any part of your body into the direct path of moving
• Do not disable or attempt to defeat any of the protective safety fea-
• Use extra caution when working within the work surface. Open
• Wearing hearing protection is recommended while operating the
• Shut off the pressurized air or disconnect the air hose before ser-
- 12 -
bleshoot this system.
and have read and understand the instructions in this manual,
particularly those that describe the system's safety features.
are not in their normal operating positions (unless you are a Data I/O
trained technician and are explicitly directed to do so by instructions
in this manual).
nent unless directed to do so in this manual. Make sure that the
machine is properly shut down before working on PSV5000.
parts.
tures of this system. Personal injury or equipment damage can occur
if any safety systems are disabled. If you suspect that a safety feature
is damaged or malfunctioning, stop using the machine immediately
and contact Data I/O Customer Service or a local Data I/O approved
service representative.
safety doors do NOT cut power to all systems. Actuators can still
operate.
machine if sound pressure levels exceed 85 decibels. Sound levels
may exceed 85 decibels depending on auxiliary equipment running
and your environment.
vicing pneumatic parts.
Data I/O ■ 096-0466-001E
Need help?
Do you have a question about the PSV5000 and is the answer not in the manual?
Questions and answers