To Select And Start A Job For Lumenx Programmers - Data I/O PSV5000 Operator's Manual

Running a Job on PSV5000 ■ List of Steps to Start a Job

To select and start a job for LumenX Programmers

1. Double‐click the LumenX Data Management Software icon.
2. Click your job name. If no jobs display, see the on‐screen Help for
pointing LumenX to the correct directory.
3. Click Select.
Figure 61: In main window, selected job is outlined in a box.
4. Check the desired programmers (left column).
Figure 62: Programmer is selected in Run window.
- 54 - Data I/O ■ 096-0466-001E