Removing And Installing The Probe - Data I/O PSV5000 Operator's Manual

Running a Job on PSV5000 ■ List of Steps to Start a Job
2. Now select the appropriate Probe Tip (based on your selection of the
optimal nozzle in Step 1). All of the tips have only 1 of 2 different
mounting squares: 1.9 or 2.7 mm.
Part Number
6460171001
6460172001
6460171001 (ProbeTip 1.9mm Square)
Figure 40: Different-sized probe tips.
3. Lastly, select the appropriate Probe (Tip Holder) for your device.
6150321002

Removing and Installing the Probe

CAUTION:
machinery. Always make sure that the PNP head is stopped in the Park
or Tool position before opening any access doors.
1. Pause or Finish a job if one is running.
2. At the Gantry window, click the Tool position to move the head to the Tool
position for easy access.
- 40 -
Probe Tips
HOLDER, RUBBER TIP,1.9MM SQUARE,PSV
HOLDER,LARGE RUBBER TIP,2.7 MM SQUARE,PSV
Probes
ASSY,CLIPLESS TIP HOLDER,PNP,PSV
Safety hazard! Possible personal injury from moving
Square Size
(mm)
6460172001 (ProbeTip 2.7mm Square)
Data I/O ■ 096-0466-001E
1.9
2.7