Fig. 2: Main Components Of The Prismapro - Pfeiffer Vacuum PrismaPro QMG 250 Translation Of The Original

1
9
8
7
Fig. 2: Main components of the PrismaPro
1 QMA 250 F Analyzer (with Faraday Cup)
2 Fastening nut
3 Electronic unit QME 250 (straight design)
4 Connection housing
5 Electronic unit QME 250 (angled design)
The use of the optional IO 250 I/O module permits the use of additional interfaces. The QME 250 elec-
tronic unit is available with the IO 250 already installed. Pfeiffer Vacuum can, however, also retrofit the
QME 250 electronic unit with a IO 250.
PrismaPro Web UI
You can find detailed information on the use of PrismaPro Web UI in the corresponding op-
erating instructions.
Operation of the PrismaPro is possible via the Web UI user interface, or with the highly comprehensive
PV MassSpec software. Storage of measured data and the evaluation of measurement results is only
possible with the PV MassSpec software. For the operation of PV MassSpec, you will require a PC with
Windows operating system (Windows 7 or higher).
2
6
6 PV MassSpec software
7 SP 250 power supply pack with mains cable
8 QMA 250 M Analyzer (with EM)
9 Intermediate piece (only with EM version)
Product description
3
4
5
19/86