Installation
3. Install the PrismaPro devices on either a router or an Ethernet switch.
4. Connect the router or Ethernet switch to the host computer via the LAN port of the router/Ethernet
Installing multiple PrismaPro devices in an existing local network
1. Use an Ethernet switch rather than a router to install multiple PrismaPro devices in an existing lo-
2. Connect all PrismaPro devices to the Ethernet switch.
3. Connect the Ethernet switch to the local network.
5.8 Installing PV MassSpec
Fig. 18:
Procedure
1. Open the directory in the Pfeiffer Vacuum Cloud.
2. Download the software.
3. Start the software installation by double-clicking "
4. If necessary, acknowledge the User Account Control prompt with "Yes".
5. Follow the installation in the wizard.
6. Accept the license with "Yes".
7. Enter your name and company name in the Customer Information window.
8. Confirm your entries with "Next".
Following successful installation, a link PV MassSpec is created on the desktop.
38/86
switch.
cal network.
Access credentials
Scan the QR code or
ware. Password: PrismaPro.
Desktop shortcut
– The software performs and completes the installation, and stores the program data on the C
drive in the newly created "Pfeiffer Vacuum" folder.
click here
and download latest version of PV MassSpec soft-
PVMassSpec_Installer.exe".