Proper Use; Foreseeable Improper Use; Responsibilities And Warranty; Owner Requirements - Pfeiffer Vacuum PrismaPro QMG 250 Translation Of The Original

Safety
2.4 Proper use
The compact mass spectrometer is used for partial pressure analysis. Typical applications are meas-
urement, monitoring and process control tasks in vacuum systems.
► Install, operate and maintain the product only in accordance with these operating instructions.
► Comply with the application limits.
► Observe the technical data.
2.5 Foreseeable improper use
Improper use of the product invalidates all warranty and liability claims. Any use that is counter to the
purpose of the product, whether intentional or unintentional, is regarded as misuse, in particular:
● Use outside the mechanical and electrical application limits (for this purpose, see: Technical data)
● Use for measurements whose results determine the safety of persons or large values
● Use with corrosive or explosive media
● Use outdoors
● Use after technical changes (inside or outside on the product)
● Use with replacement or accessory parts that are inadequate or are not approved
2.6 Responsibilities and warranty
Pfeiffer Vacuum shall assume no responsibilities and warranty if the operating company or a third party:
● disregards this document
● does not use the product for its intended purpose
● carries out any modifications to the product (conversions, changes, etc.) that are not listed in the
● operates the product with accessories that are not listed in the corresponding product documenta-
The operator is responsible for the process media used.
2.7 Owner requirements
Safety-conscious working
1. Only operate the product in a technically flawless state.
2. Operate the product in line with its intended purpose, safety and hazard-conscious and only in
3. Fulfill the following instructions and monitor the observation of the following instructions:
4. Only use original parts or parts approved by Pfeiffer Vacuum.
5. Keep the operating instructions available at the place of installation.
6. Ensure personnel qualification.
2.8 Personnel qualification
The work described in this document may only be carried out by persons who have appropriate profes-
sional qualifications and the necessary experience or who have completed the necessary training as
provided by Pfeiffer Vacuum.
Training people
1. Train the technical personnel on the product.
2. Only let personnel to be trained work with and on the product when under the supervision of
3. Only allow trained technical personnel to work with the product.
4. Before starting work, make sure that the commissioned personnel have read and understood
16/86
corresponding product documentation
tion
compliance with these operating instructions.

– Proper use

– Generally applicable safety instructions and accident prevention regulations
– International, national and locally applicable standards and guidelines
– Additional product-related guidelines and regulations
trained personnel.
these operating instructions and all applicable documents, in particular the safety, maintenance
and repair information.