Triple-Tiller
08-05-2013
Settings and adjustment
Roller depth adjustment
1
2
The machine is delivered including coloured distance clips (pos. 1)
These clips are easily removed by hand to adjust the working depth of the roller.
When not in use, excess clips may be put onthe tube (pos. 2).
Scraper
Triple-Tiller is fitted with scrapers of special steel
in between the rings of the V-profile roller.
Check their centering daily, so they do not wear
unnecessarily, and to ensure optimal effect.
The correct height adjustment is 1-2 mm from
the bottom of the roller.
11