Combi-Disc
01/08 -2015
Setting and adjustment
When starting-up the Combi-Disc in the field, it is very important that the machine is parallel with
the surface of the earth, the profile roller is at the rear and that the tractor is keeping the machine in
an exact working depth.
Draw adjustment
Three-point mounted models
For the three-point mounted models, it is important that the top link is
adjusted correctly.
Trailed models
It is important to adjust the drawbar cylinder correctly by means
of distance clips, which is placed on the drawbar box.
Height on the towing eye is approx. 500 mm
Tines
The working depth of the tines is adjusted hydraulically on the parallelogram, this means that the
working depth is changed without changing the working angle of the tines.
Parallelogram adjustment for depth adjustment.
The working angle of the tines can be changed by means of the spindles on top of the machine.
19