Combi-Disc 4,5 – 5,5m
UK
20-06-2020
Settings and adjustment
When starting-up the Combi-Disc, it is very important that the machine is parallel with the surface of
the earth. The packing roller and the tractor keep the machine in an exact working depth.
Support wheels are not for depth adjustment, but only to avoid uneven working depth at the tines from
side to side.
Drawbar
The horizontal position is adjusted by means of
the adjustment plates at the drawbar cylinder.
Height of the towing eye: approx. 500 - 550 mm
Disc
The Discs are adjusted up or down by a hydraulic
Master-Slave system.
It is important that the discs are regularly lifted to the top
to reset the Master-Slave system. The depth position is readable on the scale (standard).
The sensor can be adjusted, where el. depth stop is mounted.
It is possible to over steer the electrical system by turning off the switch mounted in the cabin, now the
discs can pass the sensor, thereby a deeper working depth is achieved e.g. at headland and tramlines.
10
Back to the table of contents