Assemble Transfer Stack - GE SEMIPHOR TRANSPHOR Series Operating Instructions Manual

5.1

Assemble transfer stack

Introduction
A single or multiple gels can be transferred at the same time. Place multiple small gels
of the same thickness side by side, or stack two gels vertically in a carefully constructed
multi-layered stack. Refer to
maximum stack thickness of SEMIPHOR TRANSPHOR UNIT series.
This section describes how to assemble the transfer stack.
Illustration of a transfer stack
with a single gel
Part
1
2
3
4
SEMIPHOR TRANSPHOR UNIT series Operating Instructions 29281777 AA
Section 8.1 Specifications, on page 62
Function
Blotting paper (2 to 3 sheets)
Gel
Membrane
Blotting paper (2 to 3 sheets)
5 Operation
5.1 Assemble transfer stack
for the minimum and
1
2
3
4
5
37