GE SEMIPHOR TRANSPHOR Series Operating Instructions Manual page 53

Step
5
6
7
8
9
SEMIPHOR TRANSPHOR UNIT series Operating Instructions 29281777 AA
Action
If desired, label the gel-contact-side of the membrane with a soft pencil.
Remove the membrane(s) from the stack with blunt forceps.
Process the membrane according to your protocol or allow the membrane
to air dry prior to storage.
Note:
Re-wet dried membranes in the appropriate wetting buffer prior to processing.
Remove the remaining blot papers and dispose of them.
Rinse the unit according to the instructions in
page 54.
5 Operation
5.5 After the transfer is complete
Chapter 6 Maintenance, on
53