vacuubrand PC 3001 VARIO select Instructions For Use Manual page 70

Cleaning and maintenance
-> Example
Mount the device
and housing sec-
tions
70
Assemble the device and housing sections
Before restarting the pumping unit, all previously removed parts
of the device and housing must be fixed back in place.
1. Set the pumping unit up-
right.
3. Screw on the union nut
until it is finger-tight; open-
end wrench SW17.
20901367_EN-US_PC3001 VARIO select Serie_V1.3_100720
2. Rotate the angled screw
fitting back into the molded
hose by a quarter turn.
4. Secure the handle; hex
key size 5.