Network Configuration; Ethernet - Larson Electronics EXPCMR-CER-IP-POE-4MP-IR-V3 User Manual

Network Configuration

Ethernet

Modify communication settings such as the IP address for the camera so that the camera can
communicate with other devices.
NOTE:

After you have changed the IP address, you need to use the new IP address to log in.

The configurations of DNS (Domain Name System) server are applicable when the device
is accessed by domain name.
Static Address
1. Click Setup > Network > Network.
2. Select Static from the Obtain IP Address drop-down list.
3. Enter the IP address, subnet mask, and default gateway address. Make sure that the IP address
of the camera is unique in the network.
4. Click Save.
9