Table of Contents
Advertisement
Watermark
Use the watermark to encrypt custom information with video to prevent unauthorized deletion or
alteration.
NOTE:
This function is only supported by certain models, please see the actual model for details.
1.
Click Setup > Security > Watermark.
2.
Select Enable and set the watermark content.
3.
Click Save.
Setting the System Time
You can use the following methods to adjust the system time of your device.
Manually Setting or Synchronizing the System Time
1.
Click Setup > Common > Time, and then click the Time tab.
2.
Select Enable for Client Time Synchronization.
3.
Set the correct time zone and system time. You may also click Sync with Computer Time to
synchronize the time settings of your camera with that of your PC.
4.
Click Save.
Synchronizing with the NTP Server
1. Click Setup > Common > Time, and then click the Time tab.
2. Select Sync Mode to Sync with NTP Server, and then set the IP address and port of the NTP
server update interval.
3. Click Save.
45
Advertisement
Table of Contents
