Larson Electronics EXPCMR-CER-IP-POE-4MP-IR-V3 User Manual page 25

Exposure
NOTE: This function may vary with models, please see actual Web interface for details. The default
settings are used for common scenes. Keep the default settings unless a particular scene is required.
1. Click Setup > Image > Image and then click Exposure.
2. Set the parameters as required. The following table describes some major parameters.
Parameter
Exposure
Mode
Shutter (s)
Description
Select the correct exposure mode to achieve the desired exposure effect.
Shutter is used to control the light that comes into the lens. A fast shutter
speed is ideal for scenes in quick motion. A slow shutter speed is ideal for
scenes that change slowly.
NOTE:

You can set a shutter speed when Exposure Mode is set to Manual or Shutter
Priority.

If Slow Shutter is set to Off, the reciprocal of the shutter speed must be greater
than the frame rate.
18