Restarting The System; Importing And Exporting System Configuration File - Larson Electronics EXPCMR-CER-IP-POE-4MP-IR-V3 User Manual

to the latest version. If enabled, both the camera and the boot program are upgraded, and
the operating system of the following new versions can be booted properly and the camera
can be upgraded conveniently.

Ensure that the power supply is normal during upgrade. The device will restart after the
upgrade is completed.

Restarting the System

1. Click Setup > System > Maintenance.
2. Under Device Restart, click Restart. The device will restart after you confirm the operation.
CAUTION: Perform this operation with caution because restarting the system interrupts the
ongoing service.

Importing and Exporting System Configuration File

Export the current configurations of the camera and save them to the PC or an external storage
medium. You can also quickly restore configurations by importing backup configurations stored on the
PC or an external storage medium back to the camera.
CAUTION:

After you perform the Default operation, all settings are restored to factory defaults, except
the following: login password of the system administrator, network settings, and system
time.

Make sure you import the correct configuration file for your camera. Otherwise, unexpected
results may occur.

The camera will restart when the configuration file is imported successfully.
1. Click Setup > System > Maintenance.
2. To import configurations that you have backed up, click Browse next to the Import button and
select the configurations you want to import, and then click Import. The result will be displayed.
3. To export configurations, click Browse next to the Export button, select the destination folder,
and then click Export.
4. To restore default configurations, click Default and then confirm the operation. The device will
restart and restore the default configurations.
47