Larson Electronics EXPCMR-CER-IP-POE-4MP-IR-V3 User Manual page 29

White Balance
White balance is the process of offsetting unnatural color cast in images under different color
temperatures so as to output images that best suit human eyes.
NOTE: This function may vary with models, please see the actual Web interface for details.
1. Click Setup > Image > Image and then click White Balance.
2. Select a white balance mode as required. The following table describes some major parameters.
Parameter
White
Balance
Red Offset
Blue Offset
3. To restore the default settings, click Default.
Description
Adjust the red or blue offset of the image:
Auto: The camera adjusts the red and blue offset automatically according to
the light condition (the color tends to be blue).
Outdoor: It is recommended for the outdoor scenes with a wide range of the
color temperature variation
Fine Tune: Allow you to adjust the red and blue offset manually.
Sodium Lamp: The camera adjusts red and blue offset automatically
according to the light condition (the color tends to be red).
Locked: Lock the current color temperature settings without adjustment.
Auto 2: The camera adjusts the red and blue offset automatically according
to the light condition (the color tends to be blue).
Adjust the red offset manually.
NOTE: You can set this parameter only when White Balance is set to Fine
Tune.
Adjust the blue offset manually.
NOTE: You can set this parameter only when White Balance is set to Fine
Tune.
22