E-Mail - Larson Electronics EXPCMR-CER-IP-POE-4MP-IR-V3 User Manual

E-Mail

After the configuration of E-mail, when alarms are triggered, you will be able to send messages to the
specified E-mail address.
1. Click Setup > Network > E-mail.
2. Configure relevant parameters of the sender and the recipient
The following table describes some major parameters.
Parameter
SSL
Attach Image
3. Click Save.
Description
When enabled, the e-mail will be sent through SSL encryption.
When enabled, the e-mail will contain 3 instant snapshots as attachment
according to the Snapshot Interval(s).
13